The short answer
Contract to hire is a hiring model where a staffing agency employs and pays a worker who does the job at your company for a set trial period, commonly 3 to 6 months. At the end, you can make a full-time offer. Converting usually triggers a conversion fee to the agency, often tied to salary and reduced the longer the person has worked.
Key takeaways
- During the contract period the agency is the employer of record. It runs payroll, taxes and any benefits, while you direct the day-to-day work.
- Conversion fees are set in your agreement with the agency. They're often a share of first-year salary that shrinks with hours worked, and they can be negotiated before anyone starts.
- Contract to hire fits roles where fit is uncertain or budget approval lags. Direct hire is better when you need a senior person who has other offers.
- Federal labor and tax rules look at how the work is controlled in practice, so a long "trial" with no decision date creates legal and retention risk.
- Write the conversion terms down before the first day: trial length, review date, offered salary range, fee schedule and who pays for what.
What is contract to hire, and how does it work?
Contract to hire means a person works on your team as a contractor employed by a staffing agency, with a planned decision point to hire them directly. You get months of real work to judge them by. They get a paid role with a path to a permanent one.
The mechanics are simple. You agree on a bill rate with the agency. The agency hires the worker as its own W-2 employee, pays them and handles payroll taxes, workers' compensation and whatever benefits its plans offer. That makes the agency the employer of record. Your managers assign the work, run the standups and review the code.
A typical arrangement runs through five stages:
- You define the role, the trial length and the target salary if they convert.
- The agency sources and screens candidates, and you interview the finalists.
- The chosen person starts as the agency's employee, billed to you hourly or monthly.
- Around the end of the term, usually 3 to 6 months in, you decide: convert, extend or end.
- If you convert, the person moves onto your payroll and the conversion fee in your contract applies.
The model sits inside a big market. The American Staffing Association counts about 11 million people who worked through staffing companies in 2024, with roughly 2.2 million temporary and contract employees on the job in an average week (ASA, 2024 data).
Contract to hire vs direct hire vs contract
The three models differ in who employs the person, how long you're committed and how you pay. Here's the side-by-side.
| Contract to hire | Direct hire | Contract | |
|---|---|---|---|
| Who employs the worker | Agency during the trial, then you | You, from day one | Agency, for the whole engagement |
| Typical length | Trial of about 3 to 6 months, then permanent | Open-ended | Fixed term or project length |
| How you pay | Hourly or monthly bill rate, plus a conversion fee if you hire | One-time placement fee, then salary and benefits | Bill rate only |
| Your commitment up front | Low until the decision point | High | Low |
| Who handles payroll, taxes and benefits | Agency, then you | You | Agency |
| Best when | Fit, skills or budget are uncertain | You know the role and need a strong candidate who'll accept | The work has an end date |
| Main downside | Some strong candidates won't take a trial | A bad hire is expensive to unwind | Knowledge walks out at the end |
On contract to hire vs direct hire, the real trade is certainty against reach. Contract to hire lowers your risk of a bad hire. Direct hire widens the pool, because a lot of experienced engineers with a steady job won't leave it for a contract with no guarantee. For the full cost picture on each path, our breakdown of what it costs to hire a software developer walks through salary, fees and time.
Pure contract is a different tool. If the work is a migration that ends in nine months, nobody needs to convert. If you're weighing contractors against handing a whole workstream to a vendor, read our guide on staff augmentation vs managed services.
How contract to hire conversion fees work
A contract to hire conversion fee is what you pay the agency to move its employee onto your payroll. It compensates the agency for recruiting a person it would otherwise keep billing for. The exact number lives in your agreement, so read that section before you sign anything.
Here are the structures you'll see most often:
- A percentage of the worker's first-year base salary, similar to a direct-hire placement fee.
- A sliding scale where the fee shrinks as the contractor bills more hours or months.
- A fee that drops to zero after a set minimum term, so a full trial means a free conversion.
- A flat fee agreed up front, regardless of salary.
- A higher bill rate during the contract in exchange for no conversion fee at all.
A sliding scale lines up incentives well. The agency earns its margin through billing. You get rewarded for running the full trial instead of poaching someone in week three.
Agreements often include a "buyout" clause covering any direct hire of the worker within a set window after the contract ends, sometimes up to a year. Know that window before you plan an exit.
When each model is the right call
Pick contract to hire when the main risk is fit. That covers a first hire in a new function, a role where the job description is still moving, or a team that has been burned by a mis-hire. It also works when headcount approval is pending and you need someone productive now.
Pick direct hire when the main risk is losing the candidate. Senior engineers, staff-level architects and anyone with a specialized skill in short supply tend to have options. Asking them to take a contract first can end the conversation.
Pick contract when the work has a clear end, like a platform migration or a compliance deadline.
HTD Talent offers all three: direct hire, contract and contract to hire, for U.S.-based tech professionals screened by engineers. If you'd rather grow junior talent trained on your stack before they start, look at our emerging-talent pipelines. The full set of options is on our staffing page.
When contract to hire is the wrong choice
It's the wrong model if you already know you want the person and you're using the trial only to delay a headcount fight. Candidates notice. It's also wrong for roles where the first three months are pure ramp-up, because you'll be judging someone before they've had a fair shot.
And it's wrong if you have no intention of converting anyone. That's a contract role with a misleading label, and it costs you trust in the market.
The risks: classification, co-employment, benefits and drop-off
Contract to hire is legal and common, but the gray areas are real. Four risks matter most.
Worker classification
Contract-to-hire workers placed by an agency are usually W-2 employees of that agency, which avoids the independent contractor question for the agency's own payroll. Problems start when a company skips the agency and pays a person on a 1099 as a "contract to hire" while treating them like staff. The IRS decides worker status with common law rules grouped into three categories: behavioral control, financial control and the relationship of the parties (IRS Topic 762).
The Department of Labor uses its own test under the Fair Labor Standards Act. In February 2026 the DOL proposed a rule that centers on two core factors: control over the work and the worker's opportunity for profit or loss (DOL news release, Feb. 26, 2026). The DOL says misclassified employees may miss minimum wage, overtime and other protections they're owed (DOL Wage and Hour Division). Check the current status of that rule with counsel before you rely on it.
Co-employment and joint employment
Even with an agency as employer of record, your company can be treated as a joint employer if it controls enough of the job. A DOL rule proposed in April 2026 would weigh whether the client hires or fires, supervises schedules or conditions to a substantial degree, sets pay, and keeps employment records (Federal Register, Apr. 23, 2026). The proposal uses a staffing agency and its client as an example of this kind of relationship.
The classic warning is Microsoft's "permatemp" litigation. Microsoft agreed to a $97 million settlement in 2000 with long-term temporary workers who argued they should have received employee benefits (Business Insurance, 2000). The lesson for contract to hire: set a decision date and keep it.
Benefits gaps
Benefits during the trial come from the agency, and they vary. Among workers paid by temporary help agencies, only 16.6 percent had employer-provided health insurance in the BLS's July 2023 survey (BLS Contingent and Alternative Employment Arrangements). That figure spans every industry, but it shows why candidates ask. For larger employers, the IRS lets a staffing firm's offer of coverage count as an offer by the client in certain cases under the Affordable Care Act (IRS employer shared responsibility Q&A, Q33). Ask your agency exactly what its plans cover.
Candidate drop-off
Some candidates won't apply to a contract-to-hire role, and some who start keep interviewing. In the same BLS survey, 27.7 percent of temp help agency workers said they'd prefer a traditional arrangement. A clear trial length, a stated salary range and a real review date reduce the drop-off more than anything else.
How to write a fair conversion clause
A fair conversion clause tells the agency, the worker and your finance team the same thing on day one. Vague clauses are where disputes start.
What a fair contract-to-hire conversion clause covers
- Trial lengthFixed term with a named review date
- Conversion salaryRange agreed before the start date
- Fee formulaPercentage, flat fee or sliding scale, written out
- Fee step-downHow the fee shrinks with hours or months worked
- Zero-fee pointDate after which conversion costs nothing
- Buyout windowHow long after the contract a direct hire triggers a fee
- Extension termsWhether an extension changes the fee
- Benefits on conversionStart date for your plans, any waiting period
- Credit for tenureWhether contract time counts toward PTO or vesting
A few rules make the clause hold up:
- Put the review date in the contract and on the hiring manager's calendar.
- Tell the candidate the conversion salary range before they accept.
- Make sure the fee schedule rewards finishing the trial instead of cutting it short.
- Decide whether contract time counts toward PTO accrual or equity vesting after conversion.
- Cap extensions so a 4-month trial can't drift into a 14-month one.
If you want a second set of eyes on terms before you sign, book a talent strategy call with our team.
If you're the candidate
Candidates search "what is contract to hire" too, so here's the short version. You'll be an employee of the staffing agency during the trial, paid by the hour or by salary, with whatever benefits the agency offers.
Before you accept, ask four questions. How long is the trial? What's the salary if I convert? How many people in this role have converted? And what benefits do I get before then? A company that can't answer those may not be planning to convert anyone.
Frequently asked questions
Can a contract-to-hire worker negotiate salary at conversion?
Yes. The conversion offer is a new job offer from your company, so the worker can negotiate it like any other. Agreeing on a salary range before the trial starts keeps that negotiation short and avoids a surprise for either side.
Can you convert a contractor early?
Usually, yes, but the conversion fee is often higher early in the contract because most fee schedules shrink with time worked. Check your agreement for a minimum term or a step-down table before you make an early offer.
Can a contract-to-hire employee quit during the trial?
Yes. Most contract-to-hire workers are at-will employees of the agency, so they can leave, and you can usually end the assignment, within whatever notice terms your agreement sets. A clear path to conversion is the best retention tool you have.
Is contract to hire the same as temp to hire?
They describe the same model. "Temp to hire" is more common in hourly and administrative roles, while "contract to hire" is the usual term in tech and professional roles.
Sources
- Staffing Industry Statistics, American Staffing Association, 2024 data
- Topic No. 762, Independent Contractor vs. Employee, Internal Revenue Service
- US Department of Labor proposes rule clarifying employee, independent contractor status, U.S. Department of Labor, 2026
- Misclassification of Employees as Independent Contractors, U.S. Department of Labor Wage and Hour Division
- Joint Employer Status proposed rule, Federal Register, April 23, 2026
- Contingent and Alternative Employment Arrangements, July 2023, Bureau of Labor Statistics
- Questions and Answers on Employer Shared Responsibility Provisions, Internal Revenue Service
- Software giant to pay $97 million, Business Insurance, 2000

